...Not for the weak hearted...
...Not for the weak hearted...
-RSS Feed from EvoM-
Tuning news from EvoM Mar 10, 2010 10:26AM FIC 1050cc Injector latency and scaling I have searched and have not come up with much on the FIC 1050cc injector latencies and scaling on pump gas. I'm about to install my set in prep for my new FP Green HTA73 i have coming. I can't seem to find much info on how people are scaling these injectors with pump gas. There is some info... Mar 10, 2010 03:32AM Ecuflash shuts down after read Yes i searched, i cant seem to find any topics related to this. I read my friend's stock ecu and it was loading fine until it hit 100% and ask me to turn the ignition off. once i click ok the entire ecu flash just shut itself down.
He is driving a JDM Evo 9 MR GSR. I've been flashing mine with... Mar 09, 2010 08:14PM Starting problems after injector scaling I recently put on pte 780cc injectors. I scaled down the Cranking Enrichment IPW by .737 (513/696). But still the car doesn't always want to start right away. It just cranks and I stop, cranks again and maybe starts after 6-10 cranks if not more.
Is there anything else I should change?
... Mar 09, 2010 05:20PM Ive bought the little handheld evoscan unit and i await its delivery. i currently have the profec e-01 laying around doing nothing. It has extensive boost control features (and timing/fuel which im not using) which I am not sure if the ecuflash/evoscan will replicate. should I just use the ecu to... Mar 09, 2010 12:56AM Changed injectors, now IDC won't log I just changed to some bigger injectors and now EvoScan won't log IDC. Any ideas what would cause this? Injector Pulse width logs fine.
Injectors in the car were factory 450cc high impedence injectors and changed to ones from a WRX STI which are high impedence 565cc injectors. They are a... Mar 08, 2010 08:18PM Evo5 starts, then dies after a few seconds... log inside Friend of a friend brought an Evo5 over to look at with an odd issue I've not seen before. Every now and again, it will get into this mode where it will start, then suddenly die for some unknown reason. When it does die, it dies abrubtly, without any kind of rpm waver or bog, and even if you are... Mar 08, 2010 06:13PM I've had an accessport for a couple years now and I'm starting to think that was a mistake. Seems like nobody cares about it anymore so I'm going to ditch it. I have a map that came with the ap that I customized. I was wondering if Ecuflash would be able to read the rom or if I'll have to hand... Mar 08, 2010 04:18PM Speed Density - Wideband o2 Necessary? I'm looking to have my car tuned with Speed Density here in the near future by GST and had a question regarding necessary hardware.
I plan on getting an EVO X 3 bar MAP Sensor and a GM IAT Sensor / Bung (3/8" NPT). Do I need a Wideband O2 Sensor as well?
I also plan on putting the IAT in... Mar 08, 2010 01:41PM hi guys
i have been trying to understand more and more of the tuning side of things. i pretty much have the concept down ok and working along with a friend on tuning my e4 for the past few weeks and was just wanting to know what you guys think so far how it looks I have attached 2 logs and ROM.... Mar 08, 2010 11:49AM hi folks, i tried converting my friends evo 8 (96530006) to the 96532706.the flash went fine and the car starts and runs but when trying to move off the car bogs down badly.we then tried 96530706 and this worked fine no problems.iv read a couple of posts with similar problems but seems there are no...
Tuning made simple
Wed, 10 Mar 2010 18:00:03 GMT